Struct nix::fcntl::SpliceFFlags [−]
pub struct SpliceFFlags { /* fields omitted */ }
Methods
impl SpliceFFlags
impl SpliceFFlags
pub fn empty() -> SpliceFFlags
pub fn empty() -> SpliceFFlags
Returns an empty set of flags.
pub fn all() -> SpliceFFlags
pub fn all() -> SpliceFFlags
Returns the set containing all flags.
pub fn bits(&self) -> c_uint
pub fn bits(&self) -> c_uint
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: c_uint) -> Option<SpliceFFlags>
pub fn from_bits(bits: c_uint) -> Option<SpliceFFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: c_uint) -> SpliceFFlags
pub fn from_bits_truncate(bits: c_uint) -> SpliceFFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: SpliceFFlags) -> bool
pub fn intersects(&self, other: SpliceFFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: SpliceFFlags) -> bool
pub fn contains(&self, other: SpliceFFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: SpliceFFlags)
pub fn insert(&mut self, other: SpliceFFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: SpliceFFlags)
pub fn remove(&mut self, other: SpliceFFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: SpliceFFlags)
pub fn toggle(&mut self, other: SpliceFFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: SpliceFFlags, value: bool)
pub fn set(&mut self, other: SpliceFFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for SpliceFFlags
impl Copy for SpliceFFlags
impl PartialEq for SpliceFFlags
impl PartialEq for SpliceFFlags
fn eq(&self, other: &SpliceFFlags) -> bool
fn eq(&self, other: &SpliceFFlags) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &SpliceFFlags) -> bool
fn ne(&self, other: &SpliceFFlags) -> bool
This method tests for !=
.
impl Eq for SpliceFFlags
impl Eq for SpliceFFlags
impl Clone for SpliceFFlags
impl Clone for SpliceFFlags
fn clone(&self) -> SpliceFFlags
fn clone(&self) -> SpliceFFlags
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl PartialOrd for SpliceFFlags
impl PartialOrd for SpliceFFlags
fn partial_cmp(&self, other: &SpliceFFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &SpliceFFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &SpliceFFlags) -> bool
fn lt(&self, other: &SpliceFFlags) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &SpliceFFlags) -> bool
fn le(&self, other: &SpliceFFlags) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &SpliceFFlags) -> bool
fn gt(&self, other: &SpliceFFlags) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &SpliceFFlags) -> bool
fn ge(&self, other: &SpliceFFlags) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for SpliceFFlags
impl Ord for SpliceFFlags
fn cmp(&self, other: &SpliceFFlags) -> Ordering
fn cmp(&self, other: &SpliceFFlags) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl Hash for SpliceFFlags
impl Hash for SpliceFFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Debug for SpliceFFlags
impl Debug for SpliceFFlags
impl Binary for SpliceFFlags
impl Binary for SpliceFFlags
impl Octal for SpliceFFlags
impl Octal for SpliceFFlags
impl LowerHex for SpliceFFlags
impl LowerHex for SpliceFFlags
impl UpperHex for SpliceFFlags
impl UpperHex for SpliceFFlags
impl BitOr for SpliceFFlags
impl BitOr for SpliceFFlags
type Output = SpliceFFlags
The resulting type after applying the |
operator.
fn bitor(self, other: SpliceFFlags) -> SpliceFFlags
fn bitor(self, other: SpliceFFlags) -> SpliceFFlags
Returns the union of the two sets of flags.
impl BitOrAssign for SpliceFFlags
impl BitOrAssign for SpliceFFlags
fn bitor_assign(&mut self, other: SpliceFFlags)
fn bitor_assign(&mut self, other: SpliceFFlags)
Adds the set of flags.
impl BitXor for SpliceFFlags
impl BitXor for SpliceFFlags
type Output = SpliceFFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: SpliceFFlags) -> SpliceFFlags
fn bitxor(self, other: SpliceFFlags) -> SpliceFFlags
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign for SpliceFFlags
impl BitXorAssign for SpliceFFlags
fn bitxor_assign(&mut self, other: SpliceFFlags)
fn bitxor_assign(&mut self, other: SpliceFFlags)
Toggles the set of flags.
impl BitAnd for SpliceFFlags
impl BitAnd for SpliceFFlags
type Output = SpliceFFlags
The resulting type after applying the &
operator.
fn bitand(self, other: SpliceFFlags) -> SpliceFFlags
fn bitand(self, other: SpliceFFlags) -> SpliceFFlags
Returns the intersection between the two sets of flags.
impl BitAndAssign for SpliceFFlags
impl BitAndAssign for SpliceFFlags
fn bitand_assign(&mut self, other: SpliceFFlags)
fn bitand_assign(&mut self, other: SpliceFFlags)
Disables all flags disabled in the set.
impl Sub for SpliceFFlags
impl Sub for SpliceFFlags
type Output = SpliceFFlags
The resulting type after applying the -
operator.
fn sub(self, other: SpliceFFlags) -> SpliceFFlags
fn sub(self, other: SpliceFFlags) -> SpliceFFlags
Returns the set difference of the two sets of flags.
impl SubAssign for SpliceFFlags
impl SubAssign for SpliceFFlags
fn sub_assign(&mut self, other: SpliceFFlags)
fn sub_assign(&mut self, other: SpliceFFlags)
Disables all flags enabled in the set.
impl Not for SpliceFFlags
impl Not for SpliceFFlags
type Output = SpliceFFlags
The resulting type after applying the !
operator.
fn not(self) -> SpliceFFlags
fn not(self) -> SpliceFFlags
Returns the complement of this set of flags.
impl Extend<SpliceFFlags> for SpliceFFlags
impl Extend<SpliceFFlags> for SpliceFFlags
fn extend<T: IntoIterator<Item = SpliceFFlags>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = SpliceFFlags>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl FromIterator<SpliceFFlags> for SpliceFFlags
impl FromIterator<SpliceFFlags> for SpliceFFlags
fn from_iter<T: IntoIterator<Item = SpliceFFlags>>(iterator: T) -> SpliceFFlags
fn from_iter<T: IntoIterator<Item = SpliceFFlags>>(iterator: T) -> SpliceFFlags
Creates a value from an iterator. Read more
Auto Trait Implementations
impl Send for SpliceFFlags
impl Send for SpliceFFlags
impl Sync for SpliceFFlags
impl Sync for SpliceFFlags